|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ºê·£µå À̸§: LAUNCH
- ¿ø»êÁö: Áß±¹
- Item name: LAUNCH X431 X-PROG 3
- Item Type: Immobilizer Programmer
- Main Function: Read and write car key chip data
- Functions 1: BMW CAS4+/FEM chip read and write
- Functions 2: EEPROM read and write
- Functions 3: On-board MCU reading and writing
- Functions 4: BENCH mode reading engine
- Functions 5: Mercedes-Benz Infrared keys reading
- Functions 6: Benz infrared key, generate special key
- Functions 7: BMW engine INS code reading
- Support Car system: Engine system,instrument system,
- Compatible modules: X431 V ,X431 V+,X431 PRO3S , X431 PRO,X431 PAD V , pad vii ,ect
LAUNCH X431 X-PROG 3 Key Programming Immobilizer Programmer Car Key Programmer Tool XPROG3 for X431 V PRO3S+ PAD V / VII XPROG 3 X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device thatcan read/write keys to the vehicle.Compatible with X-431 series diagnostic scanners,X-PROG 3 enables Anti-theft type identification£¬Remote control matching, Key chip reading& matching, anti-theft password reading and anti-theft component replacement. LAUNCH X431 XPROG 3 Features: 1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
2. Supported brands: For VW, For AUDI, For SKODA, For SEAT, For BMW, For MERCEDES-BENZ, For TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell LAUNCH X431 X PROG 3 Advantages: 1. Supports For VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports For VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of For Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of For VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU). LAUNCH X431 X-PROG 3 Core Functions: 1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of For VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of For VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of For AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the For BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the For BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute. LAUNCH X431 X prog 3 Compatible with : X431 Diagun V , X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII How to use X-PROG3 to read and write data? Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc. Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host LAUNCH X431 x-PROG 3 Specification : Input Power: DC12V Working CurrentMax: 500mA Power Consumption: 5W Storage Temperature: -20¡É~70¡É Working Temperature: 0¡É~50¡É LAUNCH X431 X prog 3 Packing List : Main unit Power adaptor Main diagnostic cable The fourth-generation data acquisition cable The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard) BENCH mode cable. MCu converter V1. MCU converter V2 Mcu cable with multiple leads.EEPROM chip adaptor Benz infrared analog acquisition key MCU cable with multiple leadsEEPROM converter User Manual
|
|
|
|
|