GT02M is a Miniintelligent GPS Vehicle positioning terminal. It combines the GSM wireless communication technology and GPS positioning system technology,terminals using industrial-grade highly integrated design,intelligent power-saving and passive drift suppression,installation is simple,connect the power supply to start work immediately,wide inpute voltage range,wide applicable to all types of cars,motor cycles,electric cars,ships,etc., can provide all-weather,real-time vehicle positioning function,with global positioning service platform,you can achieve remote vehicle management.
Method of installation
6.1Preparation before installation
1)Open the packing box to check whether the type of device is correct and whether the accessories are included.
2)This product is a high-tech electronic device,installation should be undertaken by a professional.
3)Please follow the following procedures to install your GT02.During installation, there should be no power to the device.
6.2Installing SIM card: each GT02 need to insert a GSM SIM card. The SIM card used should be enabled for GPRS.
1)Testing SIM card: To test SIM card, please install it into a normal GSM mobile and ensure it can send and receive SMS, and enables for GPRS.
2)Installing SIM card: Remove the upper cover of device,
insert SIM card as show then replace cover, lock the shell with 3 bolts.
6.3Selecting installation place and fixing it.There are two kinds of installation: Covert and non covert.
If you need the covert installation, please refer installation to an auto electrical contractor.
Note:
1)To prevent theft of the GT02,the device should be installed as covertly as possible.
2)Avoid placing the GT02 close to higher power electrical devices, such as reversing radar, anti-theft device or other vehicle communication equipment.
3)The GT02 should be fixed into position with cable ties or wide double-side tape.
4)Your device has built-in GSM antenna and GPS antenna. During installation, please make sure the receiving side face is up, with no metal object above the device to interfere with GPS reception. The following places are suggested for installation:
- Under the dash board below the front windshield;
- In the back of the parcel shelf;
- In the front bumper( non-material face), please ensure the device cannot get wet;
- Under the wiper version (non-metal), please ensure the device cannot get wet;
Notice: If the windshield is pasted with metal thermal-
protective coating, it may affect the performance of the device. In this case, please change the installation place after consulting the professional.
Cautions of device wiring
7.1The standard voltage is 9V-36V, the red wire is the positive, the black wire is the negative.
7.2Please connect the black wire to ground.
7.3After connecting the power cord, run the power cord plug to the device. After installation, supply power to device.
7.4Covert installation: Car battery cord is standard, with 2A fuse for short-circuit over current protection.
7.5Non covert installation: Cigar lighter cord is optional, with 2A fuse for short-circuit over current protection. Please contact your dealer if this mode is needed.
8. Power on/ off
8.1The device will power on automatically when
connected to power. During normal operation, red power LED flashes,while blue GPS LED and green GSM LED keep lighting. During signal searching process, GPS or GSM LED will flash. If there is no light presenting on LEDs, the device is not working normally.When installation,please make sure the receiving side face is up, with no metal object above the device to interfere with GPS reception.
8.2The device will power off after power is disconnected.
9. Platform
Website:http://www.dyegoo.net
Please click English to change to English language.
Login as account or ID, account is same as ID(IMEI last 11 bits),ID is in the label on the tracker.
Enter ID(IMEI last 11bits)
Password:123456
APP:http://www.dyegoo.net/app/
When download, please click UK flag to change to English.
For some Android mobile phone,it is needed to install GoogleServicesFramework.apk, if there no this APK,it can not display google maps in APP.
Please search GoogleServicesFramework.apk by google and install it first,then install DYEGOO Google maps app.
In production, IP,port have been written in, normally the tracker will be auto online, if the tracker offline, please set APN by SMS command.
Please get APN from the mobile operator of the inserte SIM card .
If you lost IP,port,please send below SMS command to set them back£º
Server,666666,1,gps.dyegoo.net,6100,0#
Or
Server,666666,0,47.90.39.27,6100,0#
======================================
SMS command
There no space in SMS command.
1
|
Password,old password,new password# |
Change password, default password:666666 |
Example:Password, 666666,777777# |
Change password from 666666 to 777777 |
2
|
Recover,new password# |
Change password to default password:666666 |
Example:recover,777777# |
Change password to 666666 |
3
|
Server,password,mode,IP/DNS,port,0# |
Set server parameter.mode:0, IP mode; mode:1,DNS Mode. |
Example:server,666666,0, 47.90.39.27, 6100,0# |
Set server IP: 47.90.39.27,server port:6100 |
Example:server,666666,1,gps.dyegoo.net,6100,0# |
Set server DNS:gps.dyegoo.net,port:6100 |
4
|
Apn,password,apn name,apn user,apn password# |
Set APN parameter.If apn user,apn password not needed, not write |
Example: China Mobile SIM card.command:apn, 666666,cmnet# |
Set APN name: cmnet |
Example: Canada FIDO SIM card. command:APN,666666,internet.fido.ca,fido,fido# |
Set APN name:internet.fido.ca,apn user:fido, apn password:fido |
5
|
where,password# |
GPS data position query |
example:where,666666# |
The tracker reply:Lat:N23.117475,Lon:E114. 418433,Course:0.00,Speed:0.5204,DateTime:12-07 -02 21:05:43 |
6
|
URL,password# |
Google link query |
example:url,666666# |
The tracker reply:<DateTime:12 -07 -0221:05:43> http://maps.google.com/maps?q=N23.117475,E114.418433
|
7
|
timer,password,,upload time interval# |
Set upload time interval.5-1800 seconds, the default time interval is 10 seconds |
example:timer,666666,,5# |
Set upload time interval 50 seconds. |
8
|
gmt,password,time zone direction,time zone code# |
Set time zone.Time zone direction:E or W.Time zone code:0-12. |
example:gmt,666666,e,2# |
Set time zone east 2 time zones. |
9
|
FACTORY,password# |
Change to factory setting.IP,port,DNS ,password can not be changed |
factory,666666# |
Change to factory setting.IP,port, DNS,password can not be changed |
10
|
gprsset,password# |
Check GPRS setting |
gprsset,666666# |
Check IP,PORT,APN set in the tracker |