|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ºê·£µå À̸§: ANCEL
- ±Ù¿ø: CN (Á¤Ç°)
- Car Battery Tester Function 1: Bettery Test(Ohm,Rated,Healthy)
- Car Battery Tester Function 2: Cranking Test
- Car Battery Tester Function 3: Charging Test
- Car Battery Tester Function 4: Review Data
- Support Multi-language: English,Russian
- Testing standards: AGM,GEL,EFB
- High Precision Battery Tester: up to 99%
- Support Test Battery: 12V Lead Acid Battery
- Professional Car Diagnostic Tool: Professional Car Battery Tester Analyzer
- Free Warranty: 1 year
- ANCEL BST60: Original
¿É¼ÇÁ¤º¸[(350850)BST60 Battery Test]
Support language:English,Russian
All products in the store, purchase 2 pieces , get 2% off,purchase 3 pieces,get 3% off£¬purchase 5 pieces get 4% off.
ANCEL BST60 12V Battery And Alternator Tester Cranking Charging Test OBD2 Car Diagnostic Tools Battery Analyzer For Battery Tester
This tester is used to test 12V lead-acid batteries and the charging system of vehicles.
Safety Note
1. When using the alligator clip for testing, the red clip must be clamped to the positive pole (+) of the battery, and the black clip must be clamped to the negative pole (-) of the battery, do not reverse the connection. 2. If the skin of the cable is damaged, it may cause a short circuit. Please stop using it immediately and contact maintenance personnel.
Compatible with all t2V car batteries, LED lights show test results.
Function Description
1. Test all 12V vehicle starting lead-acid batteries. 2. Show real-time voltage and battery charge with the result of LOW/MID/FULL. 3. Test charging system with the result of LOW/ OVER/CHARGE, and display the charging voltage in real time. 4. Two options available for testing: Directly plug into the vehicle cigarette lighter socket. Connect the battery terminals with attached alligator clips. 5.Protection of reverse connection and over current, with fuse built-in.
Battery Test
1. Keep the engine off. 2. Connect the tester to the battery through alligator clips or cigarette lighter test line, and the battery voltage value will be shown on the screen. ¡Ø Test with cigarette lighter socket: please insert the cigarette lighter of the tester into 12V DC cigarette lighter socket of the vehicle. ¡Ø Test with alligator clips: please connect the red alligator clip of the device to the positive pole (+) of the battery, and connect the black alligator clip to the negative pole (-) of the battery. 3. Turn off all electrical equipments and keep it for a while, and wait for the voltage to stabilize. 4. Press the ¡°Battery¡± button to enter the battery test function. At this time, the screen shows the voltage value and the test result. ¡Ø If the ¡°LOW¡± light is on, it means that the battery power is very low and needs to be charged as soon as possible. Voltage: <11.8V. ¡ØIf the ¡°MID¡± light is on, it means the battery power is lower and needs to be charged. Voltage: 11.8V ¡Â MID <12.5V. ¡Ø If the ¡°FULL¡± light is on, it means the battery is fully charged. Voltage: ¡Ã12.5V.
Two options available for testing
Comprehensive battery diagnosis, quick test and accurate test with clear results.
Precautions
1. Do not test a battery within a short period of time after charging or using electricity, otherwise the result will be inaccurate. 2. Please perform the test in the cold and flameout state, when the voltage is stable. And be sure to turn off all electrical equipments. 3. Please keep the vehicle stationary during any test, and it is strictly forbidden to test while driving.
Charging System Test
1. Please keep the vehicle stationary, increase the engine speed (RPM) to 2500r/min or above, and turn off all electrical equipments, including headlights, air-conditioning fans, glass heating, etc. 2. Press the ¡°Alternator¡± button to enter the charging system test function. At this time, the screen shows the charging voltage value and the test result. ¡Ø If the ¡°OVER¡± light is on, it means that the generator output voltage is higher. Voltage: ¡Ã15V. ¡Ø If the ¡°LOW¡± light is on, it means that the generator output voltage is lower. Voltage: <13.5V. ¡Ø If the ¡°CHARGE¡± light is on, it means the charging system is normal. Voltage: 13.5V ¡Â CHARGE<15V.
Product detail as picture show
Product Package List
As picture show
|
|
|
|
|