Feature:
1. Air pump built-in car, motorcycle, bicycle, ball and custom mode. One-click switch to use mode inflatable 0 obstacles.
2. Set the required tire pressure in advance, automatically stop when full, no need to stare at the tire pressure gauge all the time, and worry about overcharging and flat tires in the middle, you can also manually pause for safe pressure control immediately.
Description:
Name: Car Wireless Air Pump Kit
Technical parameters:
Measuring range: 3~150PSI
Measurement accuracy: ±1.5PSI
Resolution: 0.5PSI
Temperature range: -10 to 80 degrees Celsius
Working voltage: 7.4V
Input voltage: 5V/1~2A
Working current: 1-5A
Maximum current: ≤5A
No-load current: ≤2A
Charging Type-c, charging time ~4 hours
Unit selection: press to switch the unit, PSI, BAR, KPA, Kg/cm²
Preset three sets of air pressure modes: 8PSI for basketball, 28PSI for motorcycles, and 35PSI for cars
Control accuracy: ±1.5PSI
Luminous work light + warning light SOS
Automatic shutdown when the preset air pressure is full
Has the current working temperature display value
Usage:
1. The first normal charging time is 4 hours after charging, until it is fully charged each time.
2. Turn on the power button, the LCD screen starts to display, press the switch button to switch the four air pressure units PSI, BAR, KAP, KG/CM², select the unit you need, press the plus and minus keys to set the air pressure value you need, after the flashing stops, Press the power button to start inflation.
3. Short press the light button to switch between motorcycles, bicycles, cars, and balls.
Display motorcycle mode default 28PSI
Display bike mode default 120PSI
Display car mode default 36PSI
Display ball mode default 8 PSI
4. Define and set the air pressure value by yourself. Short press "-" or "+" to adjust the preset pressure value, long press "-" or "+" to quickly adjust the preset pressure value.
5. Press the power button to start inflation. When the inflation pressure reaches the pressure value you set, the smart inflator will automatically stop the inflation work immediately.
6. When the air pump starts and detects that there is no air pressure, it will automatically stop working for about 40 to 50 seconds.
7. After the inflation is completed, unscrew the trachea to complete the inflation, and pay attention to connecting the tire inflation joint to see if it is hot; there will be a small amount of air leakage when the joint is unscrewed, which is a normal phenomenon.
8. If it is judged that the tire pressure is too high, you can use the tire inflation connector to screw the corresponding position on the valve core to deflate and decompress.
9. Unscrew the tire inflation joint from the main unit, put the cylinder away, and put it in a dry, ventilated and safe place.
Matters Needing Attention
1. Children are prohibited from using the inflator! Please keep it out of the reach of children! Do not insert the trachea into the mouth, ears and eyes of live animals, and do not use the inflator as a toy.
2. It is forbidden to use this gas cylinder near flammable and explosive liquids and gases (such as gas stations)!
3. Do not walk away during the inflation process. After 10 minutes of continuous use, the machine must be shut down for 10 minutes.
4. When there is abnormal noise during inflation or the temperature is too high, please turn off the machine immediately and let the machine cool down for at least 15 minutes. Be careful with hot hands when removing the trachea.
5. The product is resistant to rain, water and impact.
6. If the gas cylinder is not used for a long time, it must be stored in a dry and airtight place. If stored for a long time, it is recommended to charge it every three months.
7. Before using the charging pump, please check whether the charging is sufficient. The first charge is 4 hours and each subsequent charge will last until fully charged.
8. For your safety and the safety of others, use the pump and its accessories in accordance with the manufacturer`s instructions.
9. Use methods not mentioned in the manual may be dangerous.
Packing list:
1 x H8 air pump host
1 x charging pipe
1 x inflatable fitting connector
1 x USB charging cable
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don`t mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.