FOXWELL BT705 12V 24V Car Battery Tester 100-2000 CCA Battery Load Tester Cranking/Charging System Test Car Battery Analyzer
The battery testers from FOXWELL aims to analyze car battery issues and battery-related system issues. BT705 is dedicatedly developed to test 12V regular flooded, AGM flat plate, AGM spiral and gel batteries and 12V & 24V starting and charging system. It provides a quick, easy and affordable solution for technicians to check battery health and detect faults of starting and charging system. It is a professional battery tester for enthusiasts, small garages, independent repairs.
Suit for everyone, you won't miss
¡ÜCheck the battery's healthy staus but limited to SOC, SOH, Resistance and etc.
¡ÜTests 12&24 volt charging system.
¡ÜTests 12&24 volt cranking system.
¡ÜTests the batteries on the car directly- no need to remove the battery.
¡ÜQuick and accurate test result display in just 3 seconds, detects bad cells directly.
¡ÜQuick starter analysis without disabling the ignition.
¡ÜDoes not emit light, heat or spark ,or discharge battery-keeps operation safe for all levels of users.
¡ÜAutomatic temperature compensation.
¡ÜRipple voltage test for easy and intuitive check of faults.
¡ÜExtremely easy to use with large backlight LCD display and menu-driven operation.
¡ÜRubberized sleeve protects, 7.8ft tester cable with metal alligator clips.
Suit for everyone, you won't miss
passenger cars, suvs, mini-vans, heavy duty trucks etc.
¡ÜMultiple automotive applications: passenger cars, suvs, mini-vans, heavy duty trucks etc.
¡ÜTests batteries from rated from 100 to 2000CCA. Cold Cranking Amps settings is in increments of 1 and you can line up with your battery ratings from 100 to 2000CCA.
¡ÜTests multiple battery types- regular flooded, AGM flat plate ,AGM spiral and gel.
¡ÜTests multiple rating systems-CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB.
FOXWELL BT705 Vehicle Battery Analysis
GOOD BATTERY: Battery is in good condition.
GOOD-RECHARGE: Battery is in good condition but low current.
CHARGE & RETEST: Fully charge the battery and retest. If you still get CHARGE & RETEST after fully charge the battery, replace it.
REPLACE BATTERY:The battery is almost dead or the connection between the battery and battery cable is poor. Replace the battery and retest; or disconnect the battery cables and retest the battery using the out-of-vehicle test. BAD CELL-REPLACE:The battery may be damaged.
Vehicle Alternator Charging System Analysis
FOXWELL BT705 tester can judge the health of an alternator by testing the car's charging system(12V&24V).
BT705 tester can detect the change in battery voltage to indirectly determine the alternator's condition(works or not works), but it cannot test the alternator directly.
Vehicle Cranking Analysis
CRANKING NORMAL: The starter voltage is normal and the battery is fully charged.
LOW VOLTAGE: The starter voltage is low and the battery is fully charged.
CHARGE BATTERY: The starter voltage is low and the battery is discharged. Fully charge the battery and repeat the starter system test.
REPLACE BATTERY: Battery must be replaced before the starting system can be tested.
NO START: No vehicle start detected.
CRANKING SKIPPED: A start was not detected.
Advanced Technology
Euipped in FOXWELL unique chip which makes BT 705 battery analyzer fast to provide a accurate testing result.
Multiple automotive applications
passenger cars, suvs, mini-vans, heavy duty trucks etc.
BT705 12V 24V Battery Tester--Keep your Automotive in a Full of Energy Status at Any Time
The tester was packing in strong box which made of high impact strength material. With this protection carrying case, you can prevent your scanner from being damaged whether you place it in a trunk, toolbox, or garage. It fits right in the palm of your hand, making it an excellent addition to your tool box.
VEHICLE ALTERNATOR CHARGING SYSTEM ANALYSIS
?NO PROBLEMS: System is showing normal output from the alternator.
?NO OUTPUT: No alternator output detected. Check connections to and from the alternator, especially the connection to the battery.L
?OW OUTPUT: Alternator not providing sufficient to power the system's electrical loads and charge the battery. H
?IGH OUTPUT: Alternator voltage output exceeds the normal limits.E
?EXCESSIVE RIPPLE: Excessive AC ripple detected. One or more diodes in the alternator are not working or there is status damage.
FOXWELL BT705 12V 24V Car Battery Tester Support languages:
English, French, German, Dutch, Spanish, Polish, Portuguese, Italian,Turkish, Russian
Product details
Specifications:
Display: Backlit, 128*64 pixels,graphic
Dimensions: 190*90*36mm (L*W*H)
Operating temperature: 0 to 60C (32 to 140F)
Storage Temperature: -20 to 70C (-4 to 158F)
Advanced Clamps & 7.8ft Test Cable
Product list
1pc X Foxwell BT705 Main Unit
1pc X User's Guide
1pc X Carry Plastic Box