Language switch :Chinese to English
Turn on power button and press "5" button two times, it shows "1 ?ÍóÐï?ð¤ "
Press " 3" button four times , it show "5 ͧ??ïÒ"
Press "5 " button one time, it show " 1 ?åë?ïÒ"
Press "5 " button one time, it show " 2 Chinese "
Press " 3" button one time, you wil see " 1 English "
Press "5 " button one time, it displays " 1 SET LANGUAGE ",
Turn off power and then turn on to finisn English language setting !
Note :
The user manual is Chinese/English , the part of Chinese says it supports which brand of China
Entrance guard system, operation steps in English.
Updated version:Remote controller (remote master) for copy kinds of wireless RF remote controller!
Full computer remote control copying machine,Computer digital frequency meter,
Fixed code/Rolling code remote control regenerator
Radio frequency tester
Anti-theft remote copy machine
It's suitable for key & lock shop, locksmith, and car service shop!
I,C:
Model A: 1. HT-12E 2. AX5326-3 3. AX5326-4 4. AX5026 5. PT2262 6. PT2242 7. HT600 8. HT680 9. HT6207
10. HT6010 11. HT6012 12. HT6014 13. MC145026 14. HT640
Model C: HCSXXX
Functions:
1. Frequency indicate (25MHz-1GMHz)
2. Data Detect
3. Duplicate /learn Fixed code remote
4. Duplicate /learn part of Rolling code remote
5. Duplicate /learn part of original car keys
6. Compare data (frequency, data, etc.) between remotes after copy
7. Regenerate new remote control
8. Chinese/English bilingual support
Remote Master User Manual:
The remote master used to copy RC, working with remote control A, B, C three styles submachines.
The use method as belows:
1, Four copy styles as below
Turn on the power, press key5 2 times, interface shows "remot copy";
1) press key5 one time, shows "1.normal copy";
2) then press key3 one time, shows "2.Singkey copy";
3) continue to press key3 one time, shows "3.MulFreq copy";
4) repeat last step, shows "4.same SYS copy";
2, "Normal Copy"
When the interface shows "1.normal copy", then action as below
1) press key5 one time, shows "input 1key to", then press the original remote 1key one time, the machine sounds "bee" a time,
enter into code reading; then press key5 one time, shows "input 2key to", continue last step. Action as this to read all keys one by one;
2) When finished original remote code reading, press key5 two times, shows "input No.1 remote", means insert RC (remote control) A,
press key5 one time, then write the code infomation into new remote;
3) adjust frequency: back to interface "remot copy", press key4 one time to test frequency:
put the original remote on the machine and press any key one time, shows the frequency.
Then put the RC A on the machine, press key1 one time, use the non-inductive regulator
action on the white capacitance to adjust frequency fit.
4) after adjust frequency, press key1 & key 2 at the same time (if the remote has 5keys, just need press key5 one time),
the light flash one time. When you press any key there is the light, means copy successfully finished.
3, Other copy method, please action as the indication in the machine.
Introduce:
Pictrue 1
![](https://ae01.alicdn.com/kf/S06749def8b8947cb9e72010efca3fde6h.jpg?width=500&height=239&hash=739)
Pictrue 2
![](https://ae01.alicdn.com/kf/S349fbe4941a14d09a1c0996f91fbe5e3y.jpg?width=500&height=295&hash=795)
"1":The type of the chips. For example, AX5326, HT6014,HCSXXX,etc.
"2":Thecode of theremote control code, For example C(Can copy,It'sFixed code), BC/CB (#B remote.Computer code),etc.
"3":The data of the original remote control.
Package list:
1*Digital Counter Remote Master
1*Power adapter
1*Capacitance pen
1*Chinese/English manual(English manual:26 and 32 pages)
2*Cable