US Standard New B9 Set Fits All 12V Cars Remote Start Engine Keyless Phone APP Control Car GSM GPS Two-Way Car Alarm System
NFLH NEW B9 GSM / GPS mobile phone control car GSM / GPS car dual-use anti-theft alarm system
Dear buyers, everyone!
I am very glad that everyone chose the 002 series products. This system is based on the B9 anti-theft system, which adds mobile phone control functions. Users can install APPs, register identities, and get authorization to start using the APP in the mobile phone to control the car. At the same time, the system is also equipped with a two-way remote control, which can control the car at the same time.
Economical and practical, good quality and low price.
Analysis of common problems:
1. GSM is not working, and the system cannot be used at all: first check the format of the SIM card, you need a SIM that supports 2G network to use it. After the SIM is working normally, the signal strength indicator on the top left of the APP will change from gray to orange, which means that the SIM is working. normal.
2. The LH002 NEW B9 system has been matched with the parameters before leaving the factory, and it can be used normally without re-matching the remote control and the mobile phone control module;
3. The GPS cannot locate the fault. Please check if the GPS antenna is installed OK. The GPS must be placed on the dashboard of the car without any obstructions. GPS signals cannot be received in the building, and GPS signals need to be received in an open area. Signal. Principle military bases, many military bases will block GPS signals on a large scale.
4. Unable to receive the alarm information of the car, please find the permission in the phone settings, find the NFLH-APP, allow all permissions, and allow the APP to run in the background.
5. Installation wiring, note: the separate red wire is connected to the 12V positive pole, and the separate white wire is connected to the ON (ACC) on the alarm host. If this wire is not connected, the driving track cannot be recorded.
LH-002 NEW B9 mobile phone control car, perfectly compatible to upgrade the old alarm system.
LH-002 NEW B9 Module Instructions for Use
Thank you very much for choosing the LH-002 NEW B9 mobile phone control module of NFLH series products in Shenzhen, China. This system is an upgrade module of the original two-way alarm system, and adds the mobile phone control function on the basis of the two-way anti-theft device. This module completely replaces the two-way remote control, and the control of the car is no longer limited by distance.
The remote control and this module can be operated at the same time, and the status is automatically synchronized (the APP interface needs to be refreshed manually).
LH-002 NEW B9 module adopts 2G communication module, power supply voltage 9-15V, power consumption current 20MA, external +12 power supply line and ON/ACC line (there are two lines at the alarm main control unit - red +12V, thick yellow ACC ).
Use the following steps:
installation method:
1. Find the +12V (thick red) connection on the main control unit of the original car immobilizer. The white ON/ACC wire is connected to the thick yellow wire.
2. Remove the original cable from the antenna box and replace it with a new cable. The black terminal of the connecting wire is input to the antenna box, and the other end is adapted to the special wire harness. The 8P end of the special wiring harness is connected to the 8P terminal on the control module, and the other end is connected to the original 5P socket of the alarm control unit antenna.
3.
Select the 2G SIM card and insert it into the control box, then connect the control box +12 power supply.
Download the APP and register for certification:
1. Scan the QR code on the side of the box, download and install the "NFLH" APP, download and open all permission options, and agree to the permission of the APP to push information to the mobile phone.
2. After the download is complete, start registering the identity information (Note: Please use the commonly used email address as the username, so that if you forget the password in the future, it will become the only basis for retrieving the password). The first line is to fill in the email address;
The second line is to set the APP login password;
The third line is to repeat the APP login password;
The fourth line is the IMEI number of the input device (the line on the back of the host);
The fifth line is to enter your license plate number.
Use and operation:
1. Log in to the APP: Log in to the APP, select "Login", enter the email address and login password (click to save the password), and click "Login" to enter the main control interface.