220V 10A Wireless Remote Control Relay Switch 433.92MHz Garage Door Openers with Signal Receiver
Feature:
1. Excellent Performance: Remote control switch offers better security and far more code combinations, higher RF sensitivity, better long range and more stable performance.
2. 2 Channels: 2 independent relay channels can either work together, to control different electronics, convenient and practical.
3. High Quality: Adopt super regeneration receiving module, strong anti interference, long range high frequency transmission design.
4. Weatherproof: Remote control receiver protects from rain or other tough weather, and IP55 waterproof, have a long service time.
5. Easy Operation: Easy programming, easy to use, fit for dooya motor, part of the tubular motor can also be used.
Specification:
Item Type: Remote Control Receiver
Material: ABS+metal
Working Voltage: AC220V
Operating Frequency: 433.92MHz
Receiving Mode: Superregeneration (or superheterodyne)
Contact Current: 220V 10A
Use Temperature: -10-70¡É
Remote Control with Battery Delivery: Dry battery 12V 23A 50mah 2pcs
Fitment: Fit for dooya motor, part of the tubular motor can also be used
Package List:
1 x
Remote Control Receiver
2 x Key
2 x Key Chain
How to use:
1. The controller comes with a power cord. One end is connected with the controller and the other end is connected with the motor. Then it can be used normally. (the plug connected to the motor has four wires, and the corresponding colors are black (live wire), blue (zero wire), brown (live wire) and yellow (grounding wire). If it is different from the jack of the outgoing line on the motor, you can connect the wire of the corresponding color by yourself, and the color must correspond, otherwise it will be short circuited). For the specific installation method, please refer to the text manual and video
2. The tubular motor controller outputs 2 channels of 220V voltage to directly control the forward and reverse rotation of the motor. The motor needs to be an AC motor. In addition, the limit of tubular motor is adjusted on the motor, which has nothing to do with the controller.
Code matching operation:
Learning operation of the controller: press and hold the learning key, and the indicator light goes out. At this time, press the lock key on the remote control once within 5 seconds, the indicator light flashes 3 times, and the code matching is successful.
Remote control learning operation: press the lock key of the remote control that has been matched with the code for 5 seconds, and the indicator light of the controller goes out. At this time, press the lock key of the transmitter that needs to be matched with the code once within 5 seconds, and the indicator light of the host flashes for 3 times, and the code is matched successfully.