Cylinder Liner Installer Replaces DD60 & J-35597-A & 5874 Fits for Detroit Diesel 60 Series Engines
Features:
1. Fitment: Suitable for Detroit Diesel 60 Series engines, Replace for J-35597-A and 5874.
2. Effect: Designed and manufactured for installing cylinder liners.
3. Function: Using three cylinder head bolts to connect the installer tool after inserting liner into the block. The mounting plate firmly presses the cylinder liner into the engine block until it is properly seated, after tightening the drive screw.
4. High Performance: Specifically designed to easily and correctly install the cylinder liners without damage, saving your time and energy.
5. Material: Made from quality & high strength carbon steel, prevent corrosion and rust, impact resistance, sturdy and durable. High precision and hardness ensure long-term reliable service.
Descriptions:
Designed to easily & quickly install cylinder liners for detroit diesel 60 series engines.
Alternative to OEM part number J-35597-A and 5874.
J-35597-A Cylinder Liner Installer Tool
EASY TO USE !
Using three cylinder head bolts to connect the installer tool after inserting liner into the block.
The mounting plate firmly presses the cylinder liner into the engine block until it is properly seated, after tightening the drive screw.
Package Included:
Installer Plate
Forcing Screw
Bridge Assembly
Lock nut 5/8"
Thrust Bearing
![](https://i.ebayimg.com/images/g/PPcAAOSwBERhpeut/s-l1600.jpg)
Using Guide:
Step 1. Slide the cylinder kit assembly into the cylinder block noting the position of the connecting rod to ensure the rod is assembled to the same position as it was when removed. Push by hand until resistance is felt.
Step 2. Install cylinder liner installer (J?35597?A) over the kit to be installed. (Note: It is necessary to leave the cylinder kit installation tool in place until after the liner protrusion is measured.)
Step 3. Thread three cylinder head bolts through the tool and into a head bolt hole, so that the round shoe of the tool is centered over the liner. Alternately tighten the three bolts until they are tight. (Note: It is not necessary to torque the bolts.)
Step 4. Turn the threaded center bolt in a clockwise direction. As the round shoe of the tool reaches the liner, ensure that the shoe is properly positioned into the cylinder liner. (Note: Use care for proper rod positioning during installation. Continue turning the bolt until the liner bottoms in the cylinder counterbore. Apply a tightening torque of 60 N·m (44 lb·ft) to the installation tool center bolt.)
Step 5. Install a dial indicator sled gage.
Step 6. Measure the distance from the top of the liner flange to the top of the block.
Step 7. Remove the cylinder liner tool.
![](https://m.media-amazon.com/images/I/61Rq9XBZyxL._AC_SL1500_.jpg)
![](https://m.media-amazon.com/images/I/61QRAtPci6L._AC_SL1500_.jpg)
![](https://m.media-amazon.com/images/I/718RgLeBiLL._AC_SL1500_.jpg)
![](https://m.media-amazon.com/images/I/61ffDnDygFL._AC_SL1500_.jpg)