KK-4835 Compressor Piston Kit Air Compressor Connecting Rod Replacement Kit for Craftsman Devildiss Dewalt Porter Cable Oil Free Air Compressor Pump, Replacement for KK-4835 KK-5081 A02743
¡¼Application¡½Compatible with Craftsman Devildiss Dewalt and Porter Cable. Fits for the following models: AC-0102 AC-0051 D-20954 Z-D24959 Z-D24960 MO-3024 Z-D26718 Z-D26717 919.152811 919.727270 919.152932 919.165230 919.167330 919.165600 919.166600 919.167320 919.152811 919.152813 919.152921 919.152931 919.155730 919.166330 919-165310, 919-165330.
¡¼Function¡½Direct replacement for KK-4835 KK-5081 & A02743 to rebuild the oil free air compressor pumps and extend the life of the compressor.
¡¼Material¡½The kit is constructed from high mechanical strength 6061 Aluminum and rubber, ensure the kit no cracks and longterm service for your air compressor..
¡¼Package Includes¡½1 x Connecting Rod, 1 x Piston Ring, 1 x Cylinder Sleeve, 2 x O-Ring that go on the valve plate.
¡¼Satisfaction Guarantee¡½ If you`re not 100% satisfied with our product, simply return it for a full refund in 30 days. Support 12 months¡¯ Warranty.
Product Description
![](https://m.media-amazon.com/images/S/aplus-media-library-service-media/356a57fc-5c9f-424c-a191-d055244558b3.__CR0,0,970,600_PT0_SX970_V1___.jpg)
WHY YOU NEED THIS?
The air compressor motor drives a piston that compresses air in the pump cylinder to fill the compressor tank. Worn pump parts? such as the valve plate and seals?stop the pump from compressing the air and filling the tank. Rebuilding the air compressor pump restores the pump`s ability to efficiently compress air.
If the tank won`t build pressure because the pump seals or valve plate are worn, rebuild the pump using the manufacturer-approved air compressor parts. Most air compressor models use a kit for rebuilding the air compressor pump. The rebuild kit includes the cylinder sleeve, connecting rod, piston ring and o-rings.
![](https://m.media-amazon.com/images/S/aplus-media-library-service-media/129f6cc6-6520-4050-b645-dfbcb92149f0.__CR0,0,970,600_PT0_SX970_V1___.jpg)
Function
To rebuild a piston cylinder in the compressor. You can replace o-rings on valve plate , cylinder sleeve , connecting rod and piston ring in the compressor.
It is recommended that you release air and unplug the air compressor before you install this kit. You will need a wrench set to replace this part.
![](https://m.media-amazon.com/images/S/aplus-media-library-service-media/da3b1124-beb1-464b-a178-93adc42a2777.__CR0,0,970,600_PT0_SX970_V1___.jpg)
Installtion Guide
Step 1. After disassemble the pump head, Remove the fan mounting bolt and pull the fan off
Step 2. Install the new compression ring
Step 3. Insert the piston rod into the sleeve.
Step 4. Reinstall the piston and the fan
Push the piston connecting rod onto the eccentric bearing. Align the piston connecting rod flush with the eccentric bearing.
Tighten the piston connecting rod Torx screw to 48 inch-pounds using a torque wrench
Step 5. Replace the both new valve plate seals on the valve plate assembly, then cover to the piston back.
Step 6.Reinstall the pump head mounting bolts.