Replaces OEM Part Number:
36532-P0G-A02 , 234-4601
Fit for:
Acura CL
1997 L4; 2.2L; F22B1 Eng.; Located after converter
1997 V6; 3.0L; Located after converter
1998 L4; 2.3L; F23A1 Eng.; Located after converter
1998 V6; 3.0L; Located after converter
1999 L4; 2.3L; Located after converter
1999 V6; 3.0L; Located after converter
Acura TL
1999 V6; 3.2L; J32A1 Eng.; Non Calif.; Located after converter
Honda Accord
1995 V6; 2.7L; Located after converter
1996 Located after converter
1997 Located after converter
1998 V6; 3.0L; Non Calif.; Located after converter
1999 V6; 3.0L; Non Calif.; Located after converter
Honda Pilot
2005 3.5L; J35A6 Eng.; Located after converter
Honda Prelude
1996 Located after converter
Honda S2000
2000 Located after converter
2001 Located after converter
2002 Located after converter
2003 2.0L; F20C1 Eng.; Located after converter
1* Oxygen Sensor
Note:
1. Please check OEM number before purchasing.
2. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly
different from the real object. Please take the real one as standard.
Must Know Before Buying:
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to
changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter`s red probe to the sensor`s signal wire
and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good
sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or
3 minutes.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You`re free to choose replacement or refund if our sensor fails to work, in this case.