Product features:
Our ABS chrome plated products are produced with molds specially designed for the vehicle and the section to which it will be applied.
Our ABS chrome plated products are produced from high quality ABS plastic and are chrome plated, which does not fade for years.
Our products are sent ready for assembly with high quality double-sided adhesive tape.
Assembly Instruction:
Before removing the protective surface of the double-sided tape after unpacking the product, make sure to perform a pre-assembly application on the area where it will be applied.
The environment where you will install must be dry and dust-free. Cleanliness of the floor is very important for assembly. Therefore, thoroughly clean the surface on which the product will be adhered with a cleaning liquid (alcohol, spirit, cellulosic thinner, etc.).
Perfumed cologne, wet wipes, gasoline, etc. Do not use liquids containing additives.
In order for the double-sided tape on the back of the product to show its full feature, the ambient temperature must be above 25C¡Æ. After removing the protective surface of the tape, use a hair dryer, etc., to increase the adhesion force. Heat the tape and the surface on which the product will be attached.
When the ambient or surface temperature reaches a suitable level, apply the product to the cleaned area in one go.
Apply pressure with a dry cloth to ensure that it adheres well.
In order for the product to adhere firmly, protect it from water for 24 hours and do not wash your car with pressurized water for 48 hours.
Warranty:
Our ABS chrome plated products are covered by a 5-year warranty.
We ask you to add your satisfaction as a comment, and we are honored to inform you that we are ready to support you for all your questions, complaints and problems. good shopping¡¦