Feature:
1. The advanced electronic temperature regulation system does not consume power and can better protect the battery. The handlebar switch with high quality workmanship is even more beautiful than the original handlebar.
2. This structure is much more difficult than straight out. The wire faces the back, and the force is not even at one point when rotating. The wire is sheathed with silicone (the old wire does not have a silicone protective cover), which can be used in extremely low environments. Silicone has excellent aging resistance and will not harden with time.
--The handle is made of high temperature resistant nitrile rubber in one step.
--The heating wire is wound horizontally, with excellent comfort, and the power is only half of similar products. A real high-efficiency and energy-saving electric heating handle.
--Special switch for ultra-thin electric heating handle.
--The right-hand throttle lead wire adopts a silicone fiber sleeve, has no effect on the flexibility of the throttle
--Removable cover, can be sealed and can be freely switched for use
Description:
Product name: Electric heating handle
Product color: black
Handle length: left handle: 143 x 36MM; Right handlebar: 127 x 36mm
Handle diameter: 22mm
Input voltage: 12V
Product power: 12W-24W adjustable
Handle temperature: 50 ¡É - 70 ¡É (The above data are obtained from experiments, laboratory room temperature at 15-20 ¡É, the specific value or due to changes in voltage, environment and other objective factors appear slightly floating, for reference only)
Handle type: sealing and opening electric handle
Switch type: multi level adjustable switch
Applicable model: 12V motorcycle with handle diameter of 22MM
Installation instructions:
1: Remove the original handlebar
2: The inner hole of the left handlebar shall be wetted with soapy water, and the twisting range shall not be too large during installation
3: When installing the balance iron on the left handlebar, adjust the position of the balance iron to be slightly separated from the handlebar, and do not squeeze the handlebar when tightening the screws
4: If the middle left handlebar slides on the steel pipe, remove the balance iron and fix it with a few drops of 502 glue from the end of the handlebar
5: The red wire is connected to the positive pole and the black wire is connected to the negative pole (Do not reverse the connection).
6: During the installation of the left handlebar, the power cord should be left with enough residual wire for rotation
Packing list:
Heating Handle x 1 set
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don`t mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.
![](https://ae01.alicdn.com/kf/Sde6b694a39be44399144d538d807650el.jpg)
![](https://ae01.alicdn.com/kf/S00bada7d65f74ff8bb670907a028cf9eS.jpg)
![](https://ae01.alicdn.com/kf/S26fe2d1562a045c28ef91c9f588c4d62M.jpg)
![](https://ae01.alicdn.com/kf/S29a55f2138004263b5a73381427b6516N.jpg)
![](https://ae01.alicdn.com/kf/S80a8f5cf5750413eb482da361639e30aK.jpg)
![](https://ae01.alicdn.com/kf/S6b59b7c4f2c24df080deaefba4b07bcaN.jpg)
![](https://ae01.alicdn.com/kf/S24b0ea8444b54b1fac284623072b6e63n.jpg)
![](https://ae01.alicdn.com/kf/Sd853612077a947948b14505c0d2e5f37q.jpg)
![](https://ae01.alicdn.com/kf/Sde3bbad40eff4941b92832bf0e75f3c6C.jpg)