ECU BDM Probe Adapters Steel BDM frame Testing for BDM100 FGTECH Chip Tunning with BDM Frame Pro Adapter for V2 5.017 V7.020
BDM Frame Pro:
Package Includes:
1PCS: BDM Frame Pro
NEW LED BDM Frame Description Part:
NEW LED BDM Frame is newest upgrade ECU Programming adapter .
More Function than old BDM Frame.
It is best used for FGTECH/BDM100/CMD/DIMSPORT ect... ECU Chip Tuning Tools.
Easy installation and operation,no hurt the ECU circuit board.
Function:
For Car rush,modify,programming bracket stand.
Fits for ECU brush&write,ecu modified&programming.
Probe holder,dimsport assistant.
Material:
Aluminum alloy stand
Arcylic board,mesh assistant
Package List:
1 x Alumiunm BMD Frame New LED
1 x Mess Arcylic Board(With LED&Connector)
4 x Probe Pens
4 x Connection Cable
Please Pay Attention :
DOES NOT contact PCB in the pacakge
LED must works up to 12V.Connect with probe,then disconnect 12V power for LED,it will light and works.
Probe pen can adjustable
22pcs Adapters BDM Probe Description Part :
Adapter width: ~60mm width for original BDM Probe, not for low quality plastic with 40mm width.
Adapter thickness: 2mm
Work together with V2 5.017 V7.020 FGTECH / BDM100...ECU Chip Tuning Tools.
Package Includes:
1 14AM00T01M for Bosch
2 14AM00T02M for Dlphi DCM
3 14AM00T03M for Bootloader ST10xx
4 14P600KT04 for Tricore EDC/MED17
5 14AM00T05M for Marelli MPC55xx JTAG
6 14AM00T06M for Dlphi MPC55xx JTAG
7 14AM00T07M for Denso CN1 Boot
8 14AM00T08M for Denso CN2 Boot
9 14AM00T09M for Denso CN3 Boot
10 14AM00T10M for Denso CN1 AUD
11 14AM00T11M for Denso CN2 AUD
12 14AM00T00M for Dlphi DCI
13 14AM00TBAS for Base Adapter 1.27
14 14AM00T14M for NexusEFI T6 Lotus
15 14AM00TB02 for Magneti Marelli BDM insert
16 14AM00TB01 for Siemens BDM insert
17 14AM00TB03 EDC7 BDM insert
18 14AM00T18M for Magneti Marelli MPC/SPC56xx
19 14AM00T13M for Nexus MPC5xx TRW ECU
20 for VAG 1.6tdi - for Siemens-Continental PCR2.1
21 14AM00T15M for Toyota NEC76F-20
22 14AM00T16M for Toyota NEC76F-26
BDM Frame stainlessDescription:
LED BDM FRAME with Adapters Set, made from hight quality stainless steel,can use on BDM100 programmer, Fgtech,CMD,ETC.
LED BDM Frame with Mesh and 4 Probe Pens for FGTECH BDM100 ECU Programmer Tool.
Features:
1. It consists of a Acrylic board, Mesh and 4 Probe Pens.
2. LED works for 12V. After you connect with the probe, disconnect 12V battery for LED, it will work.The probe pin is adjustable.
3. It is the best bracket for ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids.
4. It works with FGTECH, BDM100, CMD, DIMSPORT AIDS, and othe ECU chip tuning tools.
5. It is easy to use, much better than the old bdm frame.
Package List:
1pc x BDM frame
1pc x Bdm frame with LED (Made by a Acrylic board)
4pc x Cable for Probe
4pc x Probe